Page 1 of 2

TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Sat Nov 07, 2015 5:14 pm
by XessIV
Brands Hatch Grand Prix Circuit (WET)

Location: Brands Hatch Grand Prix Circuit (WET)
Date: (US) November 10th 8:00pm EST/ (EU) November 11th 8:00pm GMT
Laps: 31

75% rule takes place in this race. 23 laps must be completed to get points in the race lobby you qualified for.

Qualifying

Qualifying lobbies will open at 8:00pm where all drivers will get an invite from their room host. Qualifying will start at 8:15pm.


Race

Race lobbies will begin once qualifying results and rooms are sorted. This may take 10-15 minutes. Please be patient, your host will invite you.

Re: TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Sat Nov 07, 2015 5:14 pm
by XessIV
Welcome to Round 6 at Brands Hatch Grand Prix Circuit in the RAIN!!!! Good Luck to all in this final round.

Re: TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Mon Nov 09, 2015 11:59 pm
by Exiled666
Seems to be very quiet before race day......

Re: TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Tue Nov 10, 2015 4:51 am
by F4H Diablo
This is going to be a challenge. Lucky to string 3 laps together. Race should be... interesting.

Re: TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Tue Nov 10, 2015 11:27 am
by LER VisionThing
Yeah I'm truly hopeless around here, over 2 seconds off

Re: TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Tue Nov 10, 2015 5:19 pm
by ptg babycow
I think it has to do with wet being absolutely silly in forza. The rivers on the track are absolutely ridiculous and are not conducive to racing whatsoever. I predict a sloppy race. Consistency is going to be more important than lap times here i think.

Also, im about 1 second off pace currently running high 38's. Hope to get a few laps in before the race to clean it up and see if i can be in the high 37's.

Cant remember the numbers 10's number for the time, just remember the 7's, 8's and 9's.

Re: TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Tue Nov 10, 2015 6:30 pm
by F4H Diablo
I've seen time for low 38s but it's definitely not constant. Eggy's hit a 37.6 but I just can't string a lap together, let alone several. Survival of the fittest, lapped traffic is going to have to be extremely aware of the leaders this week.

Re: TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Tue Nov 10, 2015 7:40 pm
by Cyphon68
mistakes are easy here. I'm really hoping that we don't have any more disconnects :-\

Re: TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Tue Nov 10, 2015 7:49 pm
by LER VisionThing
Me too, sucked balls last week

Re: TURN Masters Series 2015: Season 2 - Round 6 - Brands Hatch Grand Prix Circuit (WET)

Posted: Tue Nov 10, 2015 7:50 pm
by Cyphon68
Guys, with the problems we had last week getting a standing start to work, we're going to have to shift to a rolling start until the inactivity kicks are gone from private lobbies.

The race will begin with a Pace Lap for the rolling gridded start on Lap 2, and will be controlled by the Pole Sitter, but should not exceed 80 mph in the final sector. He will also control the start of the race. The Pole Sitter will have a designated start zone, denoted at Brands hatch as the "Green Area" between pit entry and the start of the pit wall. The pole sitter can go at any time in the start zone without vocalization. As soon as drivers see distance to 1st rapidly increasing, the race is on for ALL drivers. The racing grid will be organized with the odd placed drivers on the racing line in relation to Turn 1, and the even placed drivers on the other side. While starting the race, please be cautious by leaving room between rows.

Note the start zone below for Brands Hatch in the image below.
Image